Mainstays WMFP41EC-3 Instrucciones De Montaje página 15

C
16. Now, go back and securely tighten all the Cam Locks and the Screws. Make sure that all the parts are tight
and there are no gaps between the parts. This will help keep the unit square.
17. Pick up the Back Panel (M) and align the pre-drilled holes against the upper long edge with the pilot holes
on the back stretcher of Top Panel (A). Attach the Back Panel (M) in place using the provided 15 mm
Washer Head Screws (6).
Assembly Instructions
A
F
M
Ø3.5 x 15 mm Washer Head
(16 used in this step)
B
Screw
⑥
15
A
B/C
M
6