Mainstays WMFP41EC-3 Instrucciones De Montaje página 7

3. Insert one Wood Dowel (3) into the center end hole of Left Upper Side Panel (B). Tap it in with a rubber
mallet, if necessary. Make sure that you use a small amount of glue with both ends of all dowels.
4. Align the drilled holes on the Left Upper Front Panel (D) with the inserted Wood Dowel (3) on the Left
Upper Side Panel (B), and then press them together. Secure the Front Panel (D) in place by engaging two
Cam Locks (1) (Refer to page 3 on Cam Lock system operation supplement).
5. Repeat last two steps to combine the Right Upper Side and Front Panels (C and E) together.
Assembly Instructions
1
B
1
C
D
3
E
3
7
Cam Lock
(4 used in this step)
①
M8 x 30 mm Wood Dowel
(2 used in this step)
③