LI-COR LI-180 Manual Del Usuario página 6

2.1 Preparing Before Use
Charge your battery ：
Connect charger to the charging port to start charging the
battery.
1. The power key lights red during battery charging and turns
off after it is fully charged.
2. A flash symbol displays at upper right corner of the LCD
screen during charging and disappears after it is fully charged.
- 6 -
English
2.1 Preparing Before Use
Install SD card ：
Measurement data is saved in text (TXT) format and Spectrum
data saved in image (JPG) format on the SD card, which has a
capacity of 16 GB.
※ Insert SD card in direction as indicated
※ Press to remove SD card
1
1. The SD card features a card latch design to prevent it from coming
loose. You may feel that the SD card is stuck when it is inserted in
or removed. In this case, pull or push it a little harder to get it in
place or removed. To remove SD card: Press it as shown in step
① and pull it out after ejecting as shown in step ②.
- 7 -
2