Basic Measurement - LI-COR LI-180 Manual Del Usuario

2.2 Preparing for Use
Set up date and time
Set up date and time before taking any measurements.
1
Press lower right
arrow icon to go to
the next page.
3
Press "Date" and "Time"
to update settings.
- 10 -
English
2
Click "Option" icon.
YYYY MM DD
4 Once date is set, press
"Yes" to exit to setup
option page.
5 Once time is set, press
"Yes" to exit to setup
option page.

2.3 Basic Measurement

Measurement
Click "VARIABLES" mode to enter measurement page.
1 Point optical sensor to light source to be tested.
2
Press the measurement button at the
bottom center of the LCD screen or the
measurement key on the left hand side
of the spectrometer to take a measurement.
3
This product beeps once after
measurement is done and
displays results on screen.
- 11 -