Input dual plug: the input plug can use the balanced XLR plug, as well as the banana plug.
4. AES/EBU input:
AES/EBU connector: 1= ground, 2= signal+, 3= signal- (when SPDIF connect, it needs this port)
5. AES/EBU input:
Four core SPEAKON speaker socket: When the amplifier is in Stereo Mode, CHA/CHB will con-
nect through this socket, the method is below 1+, 1-.
6. Line output:
Audio signal output, parallel output.
7. Internet 1/2:
LED has two colors, red color indicates full duplex interface, and green color indicates link/act
states.
4.ADVANCED SETTING SKILL
4.1.DSP Function menu tree
33