Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Share and transfer the data signals through the LAN which can control and monitor the device
on the stage at the same time by the computer. The device is specially developed a digital au-
dio controlling software which can set, back up and read all the parameters of the device.
As shown above, it connects the computer and device through an Ethernet switchboard.
As the network bandwidth is very large, all data can complete transferring within a very short
time. By the setting control, it has the below features:
Quickly find out all the devices connected to the network.
Set multiple control points in the network and then synchronize with each other.
Use IP router to control and monitor devices in the different LAN.
Upgrade the system firmware through the network.
This amplifier is a high-quality product, and the internal circuit is complex, please contact with
our technical support to verify the maintenance needs first if it is fault. The circuit of this unit is
very complex, only can be maintained by the professional technician which is trained fully.
When you send this amplifier to the manufacturer or authorized service center to repair, please
fill out the "Maintenance Information Card" which is in the back of this manual This card must
be with the product to pack in the carton, or pack it in the packing list envelope and firmly
affix it to the outside of the shipping carton. Do not send this card alone. Our company does
not undertake any responsibility for the one which is not within the maintenance range
but has already been sent to the manufacturer.
Before sending the amplifier to repair, the product owner should be responsible for ensuring
the unit whether is in maintenance range or not. About the detail maintenance range, please
refer to the "product warranty card" section.
For more information, please contact us directly.
Packing directions
1. Please fill out the attached "Maintenance Information Card" in the back of the manual.
2. Do not transport the unit with any accessories, such as the wires, hardware and the manual.
The product's repair does not need these items, and these items we are not responsible for.
3. When transporting the products, it must be fully protected. We recommend that you send
back to repair with the original packaging.
4. If you transport the unit with your own packaging, the simple packaging at least meets the
following requirements:
a. Use the double-layer carton which has passed the 275 PSI (PSI: pressure units, 1kg/cm2
approximately 14.5 PSI) burst test, and leave 8cm space to fill the solid foam polystyrene at
the six surfaces.
b. Use enough sealing tape to seal the carton.
c. Do not use thin carton. The damage due to the poor packaging will not be able to enjoy
the warranty.
Non-warranty repair fee
As to the repair is not within the warranty range, we will confirm with you to agree the main-
tenance after we detecting and will start to repair after receiving the payment. If you do not
agree to repair, please contact our service center ASAP to get back the amplifier. We have no
obligation to keep your unit, if you do not get back your unit after 30 days, it will be became
our property. If you have any questions, please contact us.
MAINTENANCE
45
Publicidad
Tabla de contenido
