König Electronic HC-EARTHERM60 Manual De Uso página 4

How to use
Measuring human core body temperature in the ear.
1. Press the "on/recall" button to turn
on the thermometer, a beep sound
is heard and the LCD displays as
Fig A within one second. When the
LCD displays as Fig. B, you can
start the measurement
2. Straighten the
pulling the outer ear up and back
(Caution: Many
suggest to limit the use of ear
thermometers to children older
than 6 months.)
3. While pulling the outer ear, insert the probe snugly into the ear canal
(best to insert deep), press the 'scan' button, release it. When you
hear a beep sound, the measurement is complete. Then remove
the thermometer from the ear. The display shows the measure
temperature.
4. Measuring again: If you want to measure again, please release the
'scan' button and wait for the '?' symbol to display, then press 'scan'
to measure again.
Advice: The time between each reading should be at least
1 minute.
5. Memory search: Press the 'on/
recall' button, the last ten memories
(NO.9- NO.0) will take turns and
show up on the LCD as Fig C and
Fig D.
6. The LCD will displays 'Er 1' as Fig E
and cannot displays temperature
when the ambient temperature is
out of the range of 10°C to 35°C.
Note: Before measuring, the thermometer must be stabilized at
the operating condition for a minimum of 30 min.
7. Shut off: The thermometer will automatically shut off if it's not
operated for a minute.
ear canal by
pediatricians
Newborn-1 year
4
Fig A Fig B
1 year-adult
Fig C Fig D
Fig E