ampridge MightyMic Pro Manual Del Usuario página 3

Description
Power/
Multi-Function
Button (MF)
Microphone
Sensitivity
Switch
Internal/External
Microphone
Selector
LED Status
Indicator
General Functions
Function
Turn On
Pairing Mode
LED Indicator Light
Turn Off
Multi-Function (MF)
Button
Delete Pairing
Battery Power Status
Phone Calls
MightyMic Pro User Manual
External
Microphone/
Headphone
Jack
Volume/Next
Song Buttons
USB-C Charging
Port
Required Action
Press and hold the "MF" button until the LED begins to flash. It
will normally auto-connect if previously paired
When the device is OFF hold the "MF" button until the blue/red
LED's begins to flash. Pair the microphone to your device. The
microphone will turn off if not paired for 5 minutes
Flashing Blue-Power On and Paired
Flashing Blue/Red-Pairing mode
Quick flashing Red 3 times-Low Power warning
Hold the "MF" button until the blue LED turns off to conserve
battery usage. The microphone will not automatically shut off if
not in use but will shut off if not paired for 5 minutes
Press the "MF" button for power ON/Off, to pause/play music or
for telephone functions
When powering on hold the "MF" button for about 8 seconds until
it powers on then turns off.
Battery status will be shown on the top right corner of the phone
screen after paired. (Only on IOS devices)
See Phone Function Section
Microphone
2