ORBILOC SERVICE KIT
The Orbiloc Service Kit makes maintaining
your Orbiloc Dog Dual quick and easy. The
Orbiloc Service Kit contains a Lithium Bat-
tery Pack (6) (2 x CR2032) and an O-ring (3)
lubricated with silicone.
CHANGE BATTERY AND MAINTAIN
Unscrew the Base (7) of the Orbiloc Dog
Dual and replace the old O-ring (3) with a
new from the Orbiloc Service Kit.
Replace the old Battery Pack (6) with a
+
new Battery Pack (6) (with the
symbol
facing down) in the Base (7) of the Orbiloc
Dog Dual .
Make sure that the Mode Selector Ring (2)
is clicked firmly to the Lens (1) . Please note
that the part with the small magnet has to
be placed in one of the four semi-circles on
the Lens (1), and that the Orbiloc Buckle
(5) is placed in the designated guide pins
on the Lens (1).
Screw the Lens (1) and Base (7) of the
Orbiloc Dog Dual together again.
10