Thrustmaster T-Charge Stand Contactless+ NW Manual Del Usuario página 8

NOTES
- The station will only charge if the rechargeable battery has been properly installed in the
Wii Remote™, and the Wii Remote™ is properly positioned in its charging cradle.
- To charge the Wii Remotes™, your Nintendo® Wii™ console must be in "Active mode" or
"Standby mode":
•
Active mode: LED on Wii™ is GREEN
•
Standby mode: LED on Wii™ is ORANGE
(= this requires that you enable "WiiConnect24" mode on your console.
Please refer to the operating instructions for your Nintendo® Wii™ console
for information on how to enable this mode.)
- To charge your Wii Remotes™, the charging station can also be connected to any other
device featuring a self-powered USB port.
- As a result of the unit's "Contactless" technology (with no connectors), the back of your Wii
Remote™ (or of your silicone protector) and the charging cradle on the station will both be
slightly warm to the touch once charging is complete. This is absolutely normal, and poses
no risk to either the user or the hardware. The temperature will automatically cool down
and return to normal in a few seconds.
TROUBLESHOOTING
The charge level LEDs will not light up, and the rechargeable batteries will not charge, if:
- The rechargeable batteries are improperly inserted in the Wii Remotes™.
- The Nintendo® Wii™ console is disabled, unplugged or improperly connected
(= if the Wii™ console's LED is OFF or RED).
- The charging station's USB connector (4) is improperly connected at the back of the
Wii™ console.
7/10