Hubbell Qualtech A700 Instrucciones De Montaje

Series A700 Flexible Arm & Wall Mounted Document Protector Stands
1. Clamp flexible arm assembly (1) to bench, desk or other
suitable support.
2. Mount document pocket support (2) to flexible arm using
two 3/8" nylon flat washers (3), one 3/8 split lock washer (4)
and one 3/8"-24 button head screw (5). Tighten securely.
On designs having document support mounting hole
off center (closer to one end than other),
mount support with hole nearer top.
Assembly Instructions
NOTE:
10 Pack 8 1/2" x 11" Page Protectors for Model A700 & A700W
Description
8 1/2" x 11" Page Protectors, Yellow Frame (10 pack)
3. Mount document pocket stops (6) to support as shown.
4. Insert page protectors as desired.
Wall Mounted Unit
1. Mount document pocket support to wall or other vertical
surface using screws and anchors supplied.
2. Follow steps 3 & 4, above, to complete installation.
Part Number
600 South Clark St.
Mayville, WI 53050
Phone: 920-387-4120
Fax: 920-387-4189
www.hubbell.com/gleasonreel/en
B700Y
Part No. 2682.e