AneX Quant Manual De Instrucciones página 7

and pushed up until the system is fixed (Fig. 12). In order to remove the
wheel, press the button. The wheel is automatically disconnected (Fig.
13). If you need to fix the swivel wheel system, press the button above
the wheel (Fig. 14). Addionally, for convenience and efficiency, you can
lock/unlock the wheels by pressing the button by both hand and foot.
BRAKE
The stroller is equipped with a Parking brake that fixes the rear wheels
(Fig. 15). To stop the stroller, press the pedal that blocks the rear wheels
(Fig. 15). To continue driving, turn the pedal to its original position (Fig. 15).
SHOCK ABSORPTION
The front wheels are equipped with Anti-shock and anti-wobble systems,
which ensure the comfort of your baby. Also, the rear wheels of the
stroller are fitted with spring shock-absorbers.
CARRYCOT MOUNTING/DISMOUNTING
To install the carrycot, insert its adapters into the pockets of the adapter
placed on the inside (before the appearance of a characteristic sound)
(Fig. 16). The carrycot adapters are locked automatically.
To remove the carrycot, press the buttons of the adapters that are equipped
with the memory system and lift it up (Fig. 17). You should not take out the
carrycot when holding it by the visor or when the child is inside.
Also, for convenience, the carrycot must be removed using unique
handles, which are placed in the pockets on both sides of its inner
part (Fig. 18) These pens can also be used for the easy carrying of the
carrycot. For the safety of the child after use, carry handles must be
returned in the same pockets.
If necessary, the inside of the carrycot can be removed and washed (Fig. 19). To
do this, first, you need to remove the coconut mattress and unfasten the inside
with a zipper. It is also possible to completely remove the inner lining of the
carrycot. To do this, remove the fabric part from the hooks around the contour
of the carrycot (Fig. 20). Besides, it is possible to remove and wash the mattress
cover from the mattress.
Additionally, the carrycot is equipped with a ventilation function, which
is regulated on the external bottom part of the carrycot. To adjust the
ventilation, move the switch to the appropriate position (on/off).
EN
7