Remote Control - PURLINE FANY 05 Manual Del Usuario

DESCRIPTION
1. Control panel
2. Control keyboard
3. Air intake
4. Ionizer
5. Right support
6. Left support
7. Carrying handle

8. Remote control

9. Air intake
10. LED for TiO2 radiation
Pass the electrical cord through the base, and
then assemble the two halves that form it.
Insert the base into the bottom of the tower
taking care to align the corresponding
openings with each other. Carefully turn over
the tower; assemble the base and the tower
with the help of the two supplied screws.
Carefully install the electrical cord in "the
cord passage guide" pointing toward the back
of the device.
1. Open the case of the remote control
2. Install the batteries (AAA).
3. Close the case.
NOTE: Insert the batteries correctly... When the batteries are worn out, remove them from
the remote control and dispose of them in a proper place.
ASSEMBLY
REMOTE CONTROL