List Of Pictograms Used; Introduction; Intended Use; Description Of Parts - Parkside PATC 2 B1 Instrucciones De Utilización Y De Seguridad

List of pictograms used

Direct current / voltage
Safety class III
USB-connection
Cordless LED inspection light PATC 2 B1

Introduction

We congratulate you on the purchase of your new product. You
have chosen a high quality product. The instructions for use are part
of the product. They contain important information concerning safety,
use and disposal. Before using the product, please familiarise your-
self with all of the safety information and instructions for use. Only
use the product as described and for the specified applications. If
you pass the product on to anyone else, please ensure that you also
pass on all the documentation with it.

Intended use

This product is only suitable for private use in dry indoor
locations e.g. in store room or garages. The product and
rechargeable batteries withstand extreme physical condi-
tions of vibration (1.0 m
intended for commercial use or for use in other applications.
Not suitable for household room illumination.

Description of parts

Hook
1
Strip light
2
ON / OFF switch
3
Magnetic base
4

Technical data

Cordless led inspection light:
Illuminant:
Rechargeable battery: lithium ion rechargeable battery, 3.7 V
Charging time:
Light duration (with
fully loaded battery): approx. 4–5 hours
LED life:
Protection class:
Protection type:
Typ-C-USB input
voltage / current:
Note: Only connect the product to a properly installed USB socket
by SELV adapter with max. 5 V
SELV:

Scope of delivery

1 Cordless LED inspection light
1 USB cable
/ s 200–2000 Hz). This product is not
2 3
5
6
7
8
1 "COB" LED (white, non-replaceable)
2200 mAh (not interchangeable)
approx. 5–7 hours
approx. 30,000 hours
IP20
5 V , 500 mA
(Uout) 500 mA.
Safety extra low voltage
1 Set of instructions for use
Charging indicator
USB input socket
Joint
USB cable
GB/IE 13