Sicam SBM 55 NW Manual Original página 48

en 48 | SBM 55 NW | Balancing a wheel
i
Use the weights positioning gauge to position the
adhesive weights.
Fig. 15: Weights positioning gauge
1 Weights positioning gauge grip
2 Weights positioning gauge head
3 Inner weight pliers
4. Ejector
5 Outer weight pliers
6 Millimetric scale
7 Knurled screw
8 Slider with stop
8.8.1 Fixing the adhesive weights with internal
clamp
!
For the standard programs use the weights positio-
ning gauge internal clamp to position the adhesive
weight in the internal plane and in the external plane.
1. Insert the necessary adhesive weight in the internal
clamp for weights.
2. Position the weights positioning gauge head (2) on
the rim edge using the internal clamp (3) in contact
with the rim itself.
Fig. 16: Internal adhesive weight application in standard pro-
grams example
|
1 695 656 076 2012-03-28
A
4
C
Fig. 17: External adhesive weight application example
3. Using ejector (4) apply the adhesive weight and push
it to adhere well.
8.8.2 Fixing the adhesive weights with external
clamp
1. Insert the necessary adhesive weight in the external
clamp for weights (5).
2. Rest the weights positioning gauge stop (8) on the
rim edge using the external clamp (5) in contact with
the rim itself.
!
The position of the adhesive weight is determined
by previously detected measurement "J" of the
balancing plane and fixed on the weights positioning
gauge (see 8.4.1).
3. Using ejector (4) apply the adhesive weight and push
it to adhere well.
4
B
4
Sicam srl società unipersonale