Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
˜ Turning on
Set the temperature control
heating level switch
Connect the power plug
RCD-protected socket-outlet .
NOTES:
Make sure that the supply voltage of the
socket-outlet meets the requirements described
in the "Technical data" chapter .
Make sure that the power plug
inserted into the socket-outlet .
To turn on the product, turn the heating level
switch
clockwise .
4 ]
[
Position Meaning
0
Product turned off
Fan operation
no heating power
Low heating level
1100 W
High heating level
2000 W
NOTES:
Heating level switch
Control light
on .
2 ]
[
Heating level switch
Control light
off .
2 ]
[
˜ Setting the temperature
To regulate the temperature at high or low
heating level, turn the temperature control
clockwise until it stops .
to
and the
3 ]
[
to 0 .
[
4 ]
to an
7 ]
[
is fully
7 ]
[
set to
,
or
[
4 ]
set to 0:
[
4 ]
3 ]
[
As soon as the desired temperature has been
reached, turn the temperature control
counter-clockwise until you hear a clicking
sound .
NOTE: The integrated thermostat
automatically turns the heating function on and
off to keep the temperature at a constant level .
Position Meaning
lowest temperature range
low to medium temperature
range
medium to high temperature
range
highest temperature range
˜ Adjusting the radiation angle
Changing the radiation angle of the air
outlet
: Use the knurled screw
[
5 ]
housing to the desired angle .
NOTE: Do not touch the product with wet
hands or if the product's housing is hot .
:
˜ Turning off
NOTE: If you have used the product at high
or low heating power, let the product run in fan
mode for about 30 seconds . This will prevent
heat build-up in the housing .
Set the temperature control
heating level switch
Disconnect the power plug
outlet .
3 ]
[
to turn the
[
6 ]
to
and the
[
3 ]
to 0 .
4 ]
[
from the socket-
7 ]
[
GB/IE
29
Publicidad
Capítulos
Tabla de contenido
