Package Contents - ISOUND -6395 Guía Del Usario

ENGLISH

Package contents

Cup Holder Mount, device cradle, screw cap, audio cable,
user guide
A aching the device cradle
1. Place the screw cap (threads facing up) over the Cup Holder
Mount's ball joint.
2. Snap the cradle onto the Cup Holder Mount's ball joint. You
will hear a "snap" when it is properly connected.
3. Tighten the screw cap to the cradle by turning it clockwise.
NOTE: You may have to loosen the screw cap to adjust the
cradle to your desired angle later.