aqprox appPOS80WIFI Guia Del Usuario página 19

2. Direct driver by the port: In this mode, no need to install driver, it is only needed to
output the characters directly to the port, and to achieve t he conversion of printing by
the hard character library in the printer. This mode makes the printing more convenient.
When using the mode of direct driver by the port, printing command sets shall be
required to control the printing, while appPOS80WIFI has been integrated ESC/POS
command sets.
Wi-Fi printer
The wireless printer is connected and the signal is transferred by radio wave. It provides
advantages such as moving freely, unrestricted by line, quickly and easily installing as well
as easy expansion and so on.
Wi-Fi printer has a transmission distance of 50m-100m.
Wireless infrastructure mode: All data transmission and network flow are processed by
way of wireless router (Wi-Fi_802,11b/g/n protocol) or the access point. The mode pro-
vides the advantages as follows:
The signal is stable, safe and can be expanded flexibly.
The Wi-Fi module used in the printer is low power consumption embedded Wi-Fi module,
it adopts static IP (IP shall not have any conflict with other devices that are connected
with the router). Turn on printer, users could set up Wi-Fi module by tools, in the option
of network setting.
The working mode of Wi-Fi module is to use: STA + Server (TCP Protocol), e.g. the ser-
ver mode. The server mode supports text printing and driver printing. Once the setting is
made, the printer will connect with server automatically.
Wi-Fi printer setting
It is to achieve the Wi-Fi working parameters setting, the connection between printer with
the wireless router.
1. Please make sure the computer is connected with the wireless router. Connect the
printer with USB line, turn on the printer. In CD, open the "tools" for printer, find the printer
setting mode, choose the right usb port, print a test page, if print successfully, turn to
"Advance" setting, see the picture bellow: