Washing machine description
Control panel
GB
Detergent dispenser to add detergent and fabric
softener (see page 8).
LEDs to find out which wash cycle phase is under way.
If the Delay Timer function has been set, the time left
until the programme starts will be indicated (see page
5).
SPIN SPEED knob to set the spin speed or exclude
the spin cycle completely (see page 7).
FUNCTION keys to select the functions available. The
button corresponding to the function selected will
remain on.
ON-OFF/LID LOCK led:
If this LED is on, the appliance Lid is locked to prevent it from being opened accidentally; to avoid any damages,
you must wait for the lamp to flash before you open the Lid.
.
The rapid flashing of the ON-OFF/LID LOCK Led together with the flashing of at least one other LED indicates
there is an abnormality. Call for Technical Assistance.
4
SPIN SPEED
TEMPERATURE
knob
knob
LEDs
FUNCTION
keys
ON/OFF
key
LID LOCKED
LED
START/RESET
key
PROGRAMME
knob
TEMPERATURE knob to set the temperature or the
cold wash cycle (see page 7).
ON/OFF key to turn the washing machine on and
off.
START/RESET key to start the programmes or
cancel incorrect settings.
ON-OFF/LID LOCK led ,to find out whether the
washing machine is on (flashing) and if the lid may be
opened (see page 5).
PROGRAMME knob to set the programmes
(see page 6).
The knob stays still during the cycle.