bosal 004-238 Instrucciones De Instalación página 4

Draw end of bunch marked with L through side ventilation grate to left standing lights (e.g. slightly cut plastic edge
6.
of ventilation grate and install bunch in the prepared cut).
Disconnect 5-input plug connection of vehicle from standing lights and connect it to suitable joint of electric bunch.
7.
Connect remaining joint of electric bunch to standing lights.
Draw end of bunch marked with R through side ventilation grate to left standing lights (e.g. slightly cut plastic edge
8.
of ventilation grate and install bunch in the prepared cut).
Disconnect 5-input plug connection of vehicle from standing lights and connect it to suitable joint of electric bunch.
9.
Connect remaining joint of electric bunch to standing lights.
Only for 13-polar set. Connect white/brown cable to earth (e.g. drill a 3 mm hole, connect and fix the eyelet terminal
10.
with sheet metal screw; do not secure the hole with anti-corrosion agent).
11.
Trailer power supply:
Only for 13-polar version. 3-input housing (red/blue, yellow and white/brown leads) is provided for expanded
socket functions. Put this part of lead bunch behind the trim. To expand socket functions it is necessary to order the
following parts:
Function "current supply and earth"
Function "current supply, charge line and earth"
Fix all the leads with supplied band clips, assemble previously disassembled parts.
Connect accumulator and check all vehicle functions with connected trailer or other suitable testing device.
part no. 014-169
part no. 015-069