First Settings; Powering On And Off - Trotec BD15 Manual De Instrucciones

Indirect (second) measurement
5) Individual distance measurement
6) Battery status
7) History, number of values that can be recalled
8) Device error warning
9) Continuous measuring/Max and Min measurements
10) Display line for the first value
11) Display line for the second value
12) Bottom line for the last value or the result of the calculation

3. First settings

Powering on and off

Switches the device and the laser on and off.
Press and hold the key to power off again.
The device powers off automatically when not used for longer than 3
minutes.
Delete key
Deletes the last action or the data on the display.
Setting the reference value
The reference value is emitted from the back of the device. Press this key
, to shift the reference value to
the front of the . An acoustic sig-
nal sounds each time the reference
point is displaced. The reference
value returns to the original position
(at the back) after the device has been
switched on.
Operating Manual – Laser Distance Meter BD 15 B - 4