DEVICE:
GOCLEVER DVR EXTREME WIFI
DEVICE OVERVIEW:
1.Shutter button/MUTE
2
2.Microphone
3.LCD display
4.Lens
5
5.Wi-Fi button
6.Power / Mode button
8
7.Infrared signal
receiver
1
8. Micro USB port
9. Mini HDMI port
4
10. Micro SD card slot
11. External microphone
7
connector
12. Battery cover
0
unlocking switch
13. LED light
3
6
9
OPERATION:
2
5
TURNING ON/OFF
Press Power/Mode button for 4 seconds to turn on the
8
device. LED light will flash red and you will hear beep
sound. Press the power button again for 4 seconds to
1
turn off the device. You will hear beep sound
If not used, camera will turn off after 5 minutes.
4
CHARGING THE BATTERY
Use usb cable to charge camera when it is off.
INSERTING A MICRO SD CARD
7
Place the micro-SD card into the memory card slot.
Press it until you hear a click sound. When the card is
0
full, the device will automatically stop the recording.
3
5
VIDEO RECORDING AND PHOTO TAKING
Select mode by pressing quickly the Power/Mode
button to select video or photo modes. Press shutter
button to start recording in video mode. Press
shutter button again to stop the recording. Press
shutter button to take a photo in photo mode.
BASIC OPERATION
Press quickly Power/Mode button to switch between
video
modes
720p@30fps) and photo modes (8Mpix and 5Mpix).
Press shutter button for 2 seconds to mute sound
of buttons.
GOCLEVER | Quick Start Guide | EN
(1080p@30fps,
720p@60fps
Wi-Fi connection with mobile
devices (Android and iOS)
1. Download Symagix software
from Google Play or Appstore
2. Turn on Wi-Fi in your mobile
device
3. Turn on Wi-Fi in camera (press
Wi-Fi button once). Wi-Fi button
will flash red light.
4. In your mobile device, navigate
to Wi-Fi settings and find hotspot
name: „EXTREME_WIFI".
5. Choose „EXTREME_WIFI" as
your hotspot.
Password is: goclever.
6. Run Symagix software. When
software connects with camera
you will see life feed from camera.
In Symagix software you can:
-Record movies and taking photos
and
-View
images
microSD card inside camera.
2
and
movies
on