Usb Playback - Sony XAV-W650BT Manual De Instrucciones

 Installation is not correct.
 Install the unit at an angle of less than 45° in a
sturdy part of the car.
 The parking cord (light green) is not connected to
the parking brake switch cord, or the parking
brake is not applied.
The picture does not fit in the screen.
 The aspect ratio is fixed on the playback source.
There is no picture/picture noise occurs in the
rear monitor.
 A source/mode which is not connected is
selected. If there is no input, no picture appears
in the rear monitor.
 The color system setting is incorrect.
 Set the color system to [PAL] or [NTSC]
according to the connected monitor (page 19).
 The picture of the rear view camera is displayed
on this unit.
 No picture appears in the rear monitor if the
picture of the rear view camera is displayed on
this unit.
Sound
There is no sound/sound skips/sound cracks.
 A connection has not been made correctly.
 Check the connection between this unit and the
connected equipment and set the input selector
of the equipment to the source corresponding to
this unit.
 The disc is defective or dirty (XAV-W650BT).
 Installation is not correct.
 Install the unit at an angle of less than 45° in a
sturdy part of the car.
 The MP3 file sampling rate is not 32, 44.1, or 48
kHz.
 The WMA file sampling rate is not 44.1 kHz.
 The MP3 file bit rate is not 48 to 192 kbps.
 The WMA file bit rate is not 48 to 192 kbps.
 The unit is in pause/reverse/fast-forward mode.
 The settings for the outputs are not made
correctly.
 The DVD output level is too low (page 14) (XAV-
W650BT).
 The volume is too low.
 The ATT function is activated.
 The format is not supported.
 Check if the format is supported by this unit
(page 22).
Sound is noisy.
 Keep cords and cables away from each other.
Disc operation (XAV-W650BT)
The disc does not play.
 The disc is defective or dirty.
 The disc is not playable.
 The DVD is not playable due to the region code.
28
GB
 The disc is not finalized (page 22).
 The disc format and file version are incompatible
with this unit (page 21).
 Press  to remove the disc.
MP3/WMA/Xvid/MPEG-4 files do not play.
 Recording was not performed according to the
ISO 9660 level 1 or level 2 format or the Joliet or
Romeo expansion format (DATA CD), or the UDF
Bridge format (DATA DVD) (page 22).
 The file extension is incorrect (page 22).
 Files are not stored in MP3/WMA/Xvid/MPEG-4
format.
 If the disc contains multiple file types, only the
selected file type can be played.
 Select the appropriate file type using the list
(page 21).
MP3/WMA/Xvid/MPEG-4 files take longer to play
than others.
 The following discs take a longer time to start
playback.
 a disc recorded with a complicated tree
structure.
 a disc to which data can be added.
Certain functions cannot be performed.
 Depending on the disc, you may not be able to
perform operations such as stop, search, or
repeat/shuffle play. For details, refer to the
manual supplied with the disc.
The soundtrack/subtitle language or angle
cannot be changed.
 Use the DVD menu instead of the direct selection
button on the remote commander (page 11).
 Multilingual tracks, multilingual subtitles, or
multi-angles are not recorded on the DVD.
 The DVD prohibits changing.
The operation buttons do not function.
 Press the reset button (page 7).
The disc will not eject.
The disc will not insert.
 Press and hold the disc eject button.

USB playback

Items cannot be played via a USB hub.
 Connect iPod/USB devices to this unit without
USB hub.
Items cannot be played.
 Reconnect the USB device.
The USB device takes longer to play.
 The USB device contains large-sized files or files
with a complicated tree structure.