Steam Ironing - Nova 320600 Manual De Instrucciones

- Always turn the temperature control dial
to the 'min' position before inserting the
mains plug into the wall socket or removing
the mains plug from the wall socket.
• Turn the temperature control dial (4)
clockwise to increase the temperature.
• Turn the temperature control dial (4)
counterclockwise to decrease the
temperature.
The temperature indicator (5) remains on
during the process. The temperature indicator
(5) goes off when the soleplate (17) has reached
the required temperature. The temperature
display (6) shows the selected temperature.
Label Type of fabric
(fig. D)
A The fabric must not be ironed.
B Synthetic (acryl, modacrylic,
polypropylene, polyurethane) A
C Synthetic (acetate, triacetate) B
C Synthetic (metal, nylon,
polyester, viscose)
C Silk
C Wool
D Cotton
D Linen
Setting the steam volume (fig. A)
• Press the steam volume button (7) to set
the steam volume. The relevant steam
volume indicator (8a/8b/8c) comes on.
"Water reservoir empty" indicator
(fig. A & B)
If the water level in the water reservoir (19) is
too low, the "water reservoir empty" indicator
(12) will come on to indicate that the water
reservoir must be refilled.
Hints for use (fig. A - D)
Dry ironing
Before you proceed, we would like you to
focus your attention on the following notes:
- Do not use the steam shot function for dry
ironing.
• Place the iron (1) onto the iron holder (18).
• Insert the mains plug into the wall socket.
The on/off indicator (3) flashes.
• Press the on/off button (3) to switch on
the appliance. The on/off indicator (3)
comes on.
• Set the temperature using the temperature
control dial (4). The temperature display
(6) shows the selected temperature.
• The temperature indicator (5) flashes as
the appliance heats the water. When the
temperature indicator (5) comes on, the
appliance is ready for use.
• The temperature indicator (5) will
Temperature
illuminate and extinguish as the appliance
(fig. C)
switches on and off to maintain the
required temperature.
Note: A buzzer will sound when the pump
inside the steam generator operates. The
"pump active" indicator (10) remains on during
the process.
B
• If you interrupt the process, place the iron
B (1) onto the iron holder (18).
C (dry ironing / • After use, place the iron (1) onto the iron
holder (18).

steam ironing)

• Press the on/off button (3) to switch off
C (dry ironing /
the appliance. The on/off indicator (3)
steam ironing)
flashes.
C (dry ironing /
• Remove the mains plug from the wall
steam ironing)
socket. The on/off indicator (3) goes off.
• Allow the appliance to cool down
completely.
Steam ironing
Before you proceed, we would like you to
focus your attention on the following notes:
- Make sure that water reservoir (19) is filled
with water for steam ironing.
• Fill the water reservoir (19) with water.
• Place the iron (1) onto the iron holder (18).
• Insert the mains plug into the wall socket.
The on/off indicator (3) flashes.
• Press the on/off button (3) to switch on
the appliance. The on/off indicator (3)
comes on.
16