Decimal Point Position & Division Value; Backlight; Accumulation; Accumulation Check - Baxtran IMP20 Manual Del Usuario

4.8 DECIMAL POINT POSITION & DIVISION VALUE
If modify division value, press
input ( ) then press
1 P 1

4.9 BACKLIGHT

Press key to turn on / off the backlight.

4.10 ACCUMULATION

Key is used in line by line printing mode, to accumulate the weights and quit the mode. See 4.5

4.11 ACCUMULATION CHECK

In line by line printing mode, press

4.12 PRE-SET TARE

Press key , it displays
procedure and decimal dot will appear on the corresponding position.
WEIGHT MEMO
*******************************
Date: 11/04/30
Ser No.
0001
0002
0003
......................................
it displays means no decimal point of division value, e.g.: to set division 0.5kg,
P 0
, it displays , input
d 1
and check the total weights.
, input tare value like 879kg, then press
P 0
No.: 0000
Time Weight (kg)
Auto Enter
13:24:53 1000
13:25:24 2000
13:25:39 1000
Auto Quit
( ) then press . Finished now the division value is 0.5kg.
5 d 5
. If the device has decimals, do the same
USER'S GUIDE IMP20 EN EN
19 19