Spare Parts / Exploded View; Environmental Protection - KRESS 800 FDF Manual Original

24 English
Service
After heavy use over a long period,
EN
the machine should be taken to a
Kress service location for inspection
and thorough cleaning.
The relevant service centres are listed in the en-
closed appendix "SERVICE" or on the website
www.kress-elektrik.de.

Spare parts / exploded view

Exploded views and spare parts lists are available
on our home-page
www.spareparts.kress-elektrik.de

Environmental Protection

Recycle raw materials instead of dis-
posing them as waste. The machine,
accessories and packaging should
be sorted for environmental-friendly
recycling.
The plastic components are labelled
for categorised recycling.
Only for EC countries.
Do not dispose of electric tools
together with household waste mate-
rial!
In observance of the European Directive 2002/96/EC
for waste electrical and electronic equipment and its
implementation in accordance with national law,
electric tools that have reached the end of their life
must be collected separately and returned to an en-
vironmentally compatible recycling facility.
FDF-EN / 0802
Warranty
1. This power tool has been carefully tested and has
been subjected to a strict quality control process.
2. We guarantee the free-of-charge repair of faults in
the power tool that arise within 24 months from the
date of purchase at the end user's premises and
which can be attributed to a material or manufactur-
ing defect. In certain countries there are special reg-
ulations concerning the warranty terms. We reserve
the right to repair faulty components or to replace
them. Replaced items become our property.
3. Inappropriate use or handling and opening up the de-
vice by unauthorised repair centres leads to the war-
ranty becoming void. The warranty does not cover:
mechanical damage due to falls etc., damage caused
by penetration of water or other fluids, cut and dam-
aged cables, motor damage and mechanical damage
caused by inappropriate overloading, wear parts e.g.
carbon brushes, drill chucks, chuck keys, worn drill-
ing spindles, motors, mains cables, batteries, saw
blades, grinding discs, dust bags, accessories in gen-
eral (drill bits, chisels etc.). Details of the various toll
wear parts can
www.spareparts.kress-elektrik.de or from one of our
service centres.
4. The warranty may only be enforced when defects are
reported without undue delay (including shipping
damage). Warranty implementation does not extend
the warranty period.
5. If you need to apply the warranty, send the original
purchase receipt together with the device to us or to
the relevant service centre.
6. The warranty obligations assumed by us shall ex-
clude any further claims on the part of the buyer, in
particular the right to cancellation of a sale, reduction
and the assertion of damage claims.
7. However, the buyer shall have the right to either a re-
duction (in the purchase price) or the cancellation of
the sales agreement should we fail to eliminate any
defects within a reasonable period of time.
8. This does not exclude compensation claims in ac-
cordance with §§ 463, 480 Para. 2, 635 BGB caused
by the failure of assured properties.
9. The provisions defined in Items 7 and 8 only apply to
the Federal Republic of Germany.
Maintenance and Service
be obtained from