s prod-
Please refer to the images located at the back of the cover page.
ith a
1. This product has a built-in rechargeable lithium ion battery. It must
P4, MD,
be charged with the USB cable provided though any laptop or desktop
computer with a USB port. Before using this product for the first time,
make sure that the battery is fully charged. Charge time is 3-4 hours.
2. When the product is operational, the LED power light shows green,
s unit.
when the battery is fully charged the LED power light changes from
green to red. When charging this product, please turn the power
control switch to the VOL position (see fig.A).
3. Insert the flexible cord into the audio device through the headphone
socket as per fig. B.
4. When you are not using the product, turn the power control switch
t
to the OFF position (see fig. C). Disconnect the digital audio device,
es
removing it from the product. If this product is not used for a long
period of time, it needs to be stored in a dry place without exposure to
ce. Do
sunlight. The battery will need to be recharged to full before re-usage.
e only
OPENING AND CLOSING THE SOUND BOOSTER
1. Ensure that the mini stereo speaker is not connected to an audio
use a
device, and that the power control switch is set to the OFF position.
2. Hold the product securely in one hand with the sound booster
facing towards you (see fig. D).
3. Push down the loudspeaker and twist anticlockwise until it locks/
unlocks (see fig. E).
a risk
4. Turn the power control to the VOL position.
WARNING: If the unit malfunctions or receives an electrostatic shock,
switch the unit off and on again using the OFF/VOL button.
NS10SPIM0097.indd 7
USING YOUR MINI STEREO SPEAKER
RESET
7
1/3/07 11:13:43