System Requirements; Package Contents; Safety Notice - npg 200M LAN Manual Del Usuario

1.3

System Requirements

Operating System
CPU
RAM
Screen Resolution
Free Disk Space
Network Interface

1.4 Package Contents

PLC 200AV x 2
n
CD ROM x 1
n
RJ45 Ethernet cable x 2
n

2 Safety Notice

This device is intended for connection to the AC power line. For installation instructions,
please refer to the installation section of this guide. The following precautions should be
taken when using this product.
Read all instructions before installing and operating this product.
n
Follow all warnings and instructions marked on the product.
n
Unplug the device from the wall outlet before cleaning. Use a damp cloth for clea-
n
ning. Do not use liquid cleaners or aerosol cleaners.
Do not operate this product near water.
n
This product should never be placed near or over a radiator or heat register.
n
Do not use an extension cord between the device and the AC power source.
n
Only a qualified technician should service this product. Opening or removing covers
n
may result in exposure to dangerous voltage points or other risks.
Do not plug the device into a power strip or surge protector because these devices
n
may consist of filter and impair signal.
Avoid plugging the device right next to noisy sources such as cell phone charger,
n
Halogen light, noisy desktop computer, vacuum cleaner, etc. this cases result in poor
transmission speed.
Unplug the device from the wall outlet and refer the product to qualified service per-
n
sonnel for the following conditions:
Microsoft Windows 2000 or XP , Vista 32-
bit/64-bit, Windows 7 32-bit/64-bit
Intel Pentium III or better, clock rate faster
than 2.0GHz recommended
At least 128MB
Any resolution
At least 20MB
At least one Fast Ethernet (100 Mbps) net-
work card, and Ethernet Cord
4