Getting To Know The Adapter; The Ethernet Interface; The Adapter's Buttons; The Adapter's Leds - npg 200M LAN Manual Del Usuario

H If liquid has been spilled into the product
H If the product has been exposed to rain or water
H If the product does not operate normally when the operating instructions are
followed
H If the product exhibits a distinct change in performance

3 Getting to Know the Adapter

3.1 The Ethernet Interface

Ethernet : The Ethernet port connects to an Ethernet network cable. The other end of the
cable will connect to your computer or other Ethernet-enabled network device.

3.2 The Adapter's Buttons

Reset: The button can restore the factory defaults and reset the device.
Security: The button is used to set the private network name. The detail see chap 6.

3.3 The Adapter's LEDs

All Adapter's LEDs are located on the front panel, there are 3 LEDs to indicate the adapter's
status.
Power: Green, The Power LED lights up when the Adapter is powered on.
Ethernet: Green, The Ethernet LED flashes to indicate activity over the Ethernet connec-
tion.
Data: Green, The Data LED flashes to indicate activity over the powerline connection.
5