Safety Instructions; Product Specifications - GreenWorks 5301002CO5301002CO Manual Del Propietário

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

SAFETY INSTRUCTIONS

NOT FOR COMMERCIAL USE
To reduce the risk of injury, the user must read and
understand this instruction sheet as well as the
operator's manual for their pressure washer before
using this product. Failure to follow all warnings and
precautions can result in death, serious personal injury,
or property damage.
IMPORTANT SAFETY INSTRUCTIONS
Keep at least 25 feet away from power lines. Do not
touch or aim spray at electrical wiring of any kind.
The gutter cleaner attachment should be used with an
extension pole only.
Do not use the gutter cleaner attachment while on a
ladder or scaffolding or on other unstable, unsecured
grounds
Do not adjust the gutter cleaner attachment or change
nozzles or accessories while spraying or while the
attachment is under pressure. Turn off the pressure
washer, shut off the water supply, point the nozzle in
a safe direction, and pull the trigger to release water
pressure before making any changes.
When using the gutter cleaner attachment, make sure
shingles with deterioration may incur damage under
high pressure. During operation, keep the gutter
cleaner attachment level with the gutter to avoid
shingle kickback and damage.
Do not exceed the maximum rated pressure or volume
Do not remove or alter any warning labels included on
the gutter cleaning attachment.
Before beginning operation, make certain the area you
plan to work in is clear of obstructions or hazards.
Maintain proper balance and control of gutter cleaner
attachment at all times.
To minimize the risk of kickback, grip the extension
maintain control of the extension pole if kickback
occurs.
Do not direct the spray directly under shingles.
Always stay more than 2 feet away from any gutter
end caps.
Only spray nozzles inisde gutters, spraying under
does not backup in gutters while cleaning.

PRODUCT SPECIFICATIONS

Connection ................1/4 in. Quick Connect Plug Inlet
Pressure...........................................................3300 psi
Maximum Water Flow......................................3.0 GPM
Maximum Water Temperature............................. 104°F
Weight............................................................... 1.3 lbs.
WARNING
OPERATION
ATTACHING GUTTER CLEANER TO
EXTENSION POLE (NOT INCLUDED) See
Figures 1 - 2.
Gutter cleaner attachment
Collar
Slot
The attachment is designed for use with 9 ft. or more
extension poles only (not included).
Turn off the pressure washer and shut off the water
supply. Pull trigger to release water pressure.
Engage the lock out on the trigger handle by
pushing up on the lock out button until it clicks into
the slot.
Pull back the quick-connect collar of the extension
pole coupler.
Push the gutter cleaner attachment 1/4 in. quick-
connect plug into the extension pole coupler until
it clicks. Let collar slide back into place.
Check to be sure gutter cleaner attachment is
secured properly.
USING GUTTER CLEANER ATTACHMENT
See Figures 3 - 5.
When using the gutter cleaner attachment, make sure you
deterioration may incur damage under high pressure. During
operation, keep the gutter cleaner attachment level with the
gutter to avoid shingle kickback and damage.
The attachment uses a two-directional spray for stability and
effective cleaning.
2
1/4 in. quick-connect plug
Extension pole coupler
Extension pole
fig.1
Lock-out
fig.2
Trigger

Publicidad

Tabla de contenido
loading

Tabla de contenido