ZIGLINT Y8278FL Manual Del Usuario página 7

Fixing the recharge seat to the wall
• Fix the recharge seat (8) to the wall, on a stable, clean and dry
surface.
• Use only the screws included with the device.
• The device must be positioned in such a manner that neither
the device e itself nor its power supply can be reached by
children and/or mentally disabled people.
• The recharge plug must be turned upwards so that the device
can be hung with the dust container (5) facing upwards.
Using the device for dry suction
Following accesssies working for dry purpose:
• Crevice nozzle(7): is suitable for upholstery, cleaning the inside
of cars and fro all nooks and crannies that can't be reached
with other nozzle.
a) Plug the crevice nozzle (7) ; apply pressure on it to attach it.
The device can suck up crumbs even without the terminal
attachment.
b) Turn on the device moving the switch (3) forward.
c) While operating the device, always keep the suction nozzle
turned downwards.
d) To turn off the device, operate again on the switch (3) moving
it backwards.
Note: if turbo nozzle was tangled in long hair or otherthing,
please stop vacuum at once, and turn lock left, to take out brush.
After clean bursh, put in and turn on light locked bursh.
Using the appliance to suck up liquids
• Never use the device to suck up any other liquid than cold
water.
• Do not exceed the indicated MAX level when sucking up liquids
(the MAX level must always be measured when the appliance is
in the vertical position, with the suction inlet facing down).
EN-4