Trouble Shooting - Emtec S885 Manual Del Usuario

Note: Note:
Specifications are subjected to change without prior notice. Specifications are subjected to change without prior notice.

6 Trouble Shooting

6 Trouble Shooting
In some region, the digital terrestrial signal may be weak. So you'd better use the antenna in In some region, the digital terrestrial signal may be weak. So you'd better use the antenna in
which the booster was built, for watching the weak signal channels. which the booster was built, for watching the weak signal channels.
Problem Problem
Standby light not lit Standby light not lit
No signal found No signal found
No picture or sound No picture or sound
Scrambled channel message Scrambled channel message
No response to remote controller No response to remote controller
Forgotten channel lock code Forgotten channel lock code
Forgotten menu lock code Forgotten menu lock code
The remote controller will not ope- The remote controller will not ope-
rate your SCART receiver. rate your SCART receiver.
After moving the SCART receiver After moving the SCART receiver
to another room you find you are to another room you find you are
no longer able to receive digital no longer able to receive digital
reception. reception.
10/UK
Possible cause Possible cause
Mains lead unplugged Mains lead unplugged
Mains fuse blown Mains fuse blown
Aerial is disconnected Aerial is disconnected
Aerial is damaged /misaligned Aerial is damaged /misaligned
Out of digital signal area Out of digital signal area
Tuned to digital teletext channel Tuned to digital teletext channel
Channel is scrambled Channel is scrambled
Receiver off Receiver off
Handset not aimed correctly Handset not aimed correctly
Front panel obstructed Front panel obstructed
Hand set batteries exhausted Hand set batteries exhausted
(1)The batteries in your remote (1)The batteries in your remote
controller need replacing controller need replacing
()There is an obstruction blocking ()There is an obstruction blocking
the signal path between the remote the signal path between the remote
controller and the box. controller and the box.
The aerial feed former new point The aerial feed former new point
may come through a distribution may come through a distribution
system which may reduce the digital system which may reduce the digital
signal now received by the box. signal now received by the box.
What to do What to do
Check mains lead Check mains lead
Check fuse Check fuse
Check aerial lead Check aerial lead
Check aerial Check aerial
Check with dealer Check with dealer
Reduce to another channel Reduce to another channel
Select alternative channel Select alternative channel
Plug in and turn on plug Plug in and turn on plug
Aim handset at front panel Aim handset at front panel
Check for obstructions Check for obstructions
Replace handset batteries Replace handset batteries
Re-install channels to cancel Re-install channels to cancel
channel lock channel lock
Contact help line Contact help line
(1)Replace the batteries. (1)Replace the batteries.
() Check that there is nothing in the () Check that there is nothing in the
way of the path between the remote way of the path between the remote
controller and the receiver. controller and the receiver.
Try a direct feed from the antenna. Try a direct feed from the antenna.