Riverbed Cascade Manual Del Usuario página 15

1. Point your browser to the IP address that you specified for the appliance on the Setup page. This displays the login
page.
2. Log in to the admin account with the password that you specified at the end of the configuration task.
3. Navigate to the System > Devices/Interfaces page and check the status of the data source devices on the Devices
tab. When a data source comes on line, the appliance begins collecting data. At least one data source must be listed
with a green status indicator before you can complete the installation verification.
4. Go to the Dashboard page and verify that the graphs display data.
5. Go to the System > Information page and assure that all status indications (System and Component, DNS Server)
are displaying OK.
6. Go to the Reports > Traffic page. Near the bottom of the Report Criteria section, click Run now. Verify that a
traffic report is displayed. (It will take a short time for the report to display.)
Riverbed Cascade Quick Start Guide
Cascade Quick Start Guide
11