Installation; Warranty And Liability - cabstone CAB WH DESKSCOPE 60 SCHWARZ Manual De Instrucciones

manual

5 INSTALLATION:

ATTeNTION! Only trained professionals are authorized to install and remove the
product! For more information please read the Chapters "Notes on Safety" and
"Troubleshooting".
mounting the desk:
Step 1
Fix the desk mount to a horizontal and solid plate or desk of
a thickness from 10 to 40 mm by fastening the locking screw.
If fastened too hard, leads of pressure can occur. If not
fastened enough, the position of the desk mount can change
unintentional.
Fix the 3rd of 3 cable holders G with the screw H.
Model 380:
Installing the screen holder to
Step 2
the monitor:
Fix the monitor with 4 srews A, B, C or D to the desk
mount with the same distance to the center.
Never place the display screen on the front side to
avoid damaging the device.
Combining screen holder and desk mount:
Step 3
Slide the monitor and the fixed screen holder into the
desk mount from above like shown.
Fasten the screws at both sides by using the fitting
tool.
Locking the monitor:
Step 4
If requested, lock the monitor by using an
additional padlock. (not included)

6 WARRANTy AND LIABILITy:

• The manufacturer warrants this new device for 2 years.
• As the manufacturer has no influence on installation, warranty of the product only
applies to the installation kit.
• If any fault or damage is detected on your device, please contact your dealer and provide
your sales slip or invoice as evidence of the purchase, if necessary. Your dealer will
10