Mounting Klang Mr1 Speaker On The Wall - Loewe klang mr1 Guia Del Usuario

Loewe klang mr1, klang mr3, klang mr5

Mounting klang mr1
12 Mounting klang mr1
speaker on the wall
You can place klang mr1 on furniture or shelves,
but there is also the option of mounting it on
the wall.
Installation must be carried out by qualified
personnel only. Incorrect assembly can result
in severe personal injury and property damage.
It is the installer's responsibility to verify that the
wall will safely support the total load of the unit
and wall brackets.
When drilling holes in walls it is essential to avoid
contact with electrical cables and water or gas
pipes contained within. Use of a good quality
live wire detector and hidden object locator is
therefore recommended. Only drill into struc-
tures when you are sure it is safe to do so.
If the speaker is wall mounted, you will not have
access to the buttons on the bottom, so you'll
need to make any necessary connections first.
Additional tools and hardware (not included) are
required for the installation.
Please refer to the last pages of this manual for
an illustration of the wall installation.
1
2
Multiroom Loewe klang mr1
4
ng mr1
m
5
22
1. Carefully check the package contents be-
fore starting the installation. The following
wall mounting parts are supplied with your
klang mr1:
ƒ Wall bracket
ƒ Magnetic cover for the wall bracket
ƒ Bottom cover for the speaker
ƒ 1x Screw
2. Place the wall bracket on the wall and mark
the two holes location with a pencil. Drill two
holes in the wall at the marked locations. If
necessary, insert one dowel (not supplied)
into each hole. Fix the wall bracket to the wall
using two self-tapping screws (not supplied).
Loosen lower screw for level adjustment -
tighten when finished.
The end user is responsible for selecting the
correct type of screw and dowel depending on
the wall type.
3. Place the magnetic cover on the wall bracket
so that it covers the screw heads.
4. Route the power cord and all other cables
through the hole in the corner of the wall
bracket.
5. Connect them to the speaker.
6. Install the bottom cover on the speaker.
7. Secure the speaker to the wall mount with
the supplied screw.
3
B
A
6
7
1x