Operation And Use - Denver BC-241 Manual De Instrucciones

II. Operation and use

Turn on/Shutdown
Camera: Press and hold power button
on/shut down the device.
Monitor: Press power switch
seconds to shut down the device.

Pairing
It's required to pair the units before using.
1. Press and hold power button
simultaneously in shutdown mode until enter into the pairing
interface, select the desired channel with the direction key.
2. Press OK button to start pairing after finishing channel selection.
3. Turn on the camera, then short press Pair key for pairing within 60
seconds, the monitor will show a message once pairing
successfully.
4. Follow the message to exit the pairing interface to real time state
and the image will display in the monitor. Note: It will return to real
time state if the pairing operation is failed or not complete within 60
seconds.
at least 3 seconds to turn
to turn on, and press and hold at least 3
and talkback button
-ENG- 3 -
of monitor