Publicidad
Idiomas disponibles
Idiomas disponibles
2. Under time display mode, press SET button to check below in
sequence: time – calendar - A1 (=alarm 1) - A2 - A3 - temperature
time
3. Under any mode (except temperature mode), press and hold
SET button for 2 seconds to enter setting mode, press UP/DOWN
button to set the value. Press and hold the buttons to speed up the
forward or reverse scanning of the digits.
4. UP key: Under clock, calendar or temperature mode, press UP
button to switch to 3 display modes (dP-1, dP-2 and dP-3):
• dP-1 mode: LED alternately display clock, date and temperature,
clock display for 10 seconds, date and temperature display for 2
seconds each
• dP-2 mode: Default clock display, set your desired mode and
then keep it as display mode.
• dP-3 mode: default clock display, set your desired value and quit
then after 15 seconds back to time display.
5. DOWN key: press DOWN button to turn on/off power saving
function: --Sd displayed means power saving function off. Press
DOWN button to turn on power saving function oNSd will appears
on display.
6. When the power saving function is on and without any operation
in 10 seconds, the display is off and enter power saving mode,
time system keeps working.
7. Under temperature mode, press DOWN button for 2 seconds to
switch Celsius and Fahrenheit unit.
Time setting
1. After powered on, the default time is 12:00am (12Hr system).
2. Under time mode: press and hold SET button for 2 seconds, 12
hour format (12 Hr) will appear on display and flash. PM indicator
on the top left corner will appear in the afternoon. Press UP/DOWN
button to change clock setting display to 24 hour format (24 Hr).
3. Setting the Clock: Press SET button repeatedly to set the time
as the following sequence: 12/24hr switchover – hour – minute –
quit. Press and hold the UP/DOWN buttons to speed up the
forward or reverse scanning of the digits.
4. Under setting mode, without any button operation in 15 seconds,
back to time display mode.
Publicidad
