Tabla de contenido
Publicidad
ENGLISH
General Operations
Reset the unit
When operating the unit for the first time,
after replacing the car battery or changing
the connections, you must reset the unit.
1.Turn off the unit power.
2.Press the
OPEN
the front panel, then press the
button with a ballpoint pen or similar object
to restart the unit.
Power on/off
In power off mode, switch on the unit by
pressing any button except the
button. When the system is on, press and
hold the
POWER
on/off button
head unit or remote control
sceconds to turn off the unit.
Sound adjustment
- Rotate the volume control on the head unit
to adjust volume level.
- Press the
SEL
button(Volume control)
short and repeatedly to select the
setting that you would like to adjust:
volume, bass, treble, balance and fader.
- Rotate the volume control or the head unit
to adjust level of the selected sound mode:
- VOL:0,1 ~ 44,45
- BAS / TRE: -7, -6 ~,0, ~ +6,+7,
- BAL: 8L,7L, ~,0, ~, 7R,8R
- FAD: 8F, 7F, ~, 0, ~, 7R,8R
Note:
1. In each mode, w
adjusted for about 5 seconds, the current
setting will be saved and it returns to the
previous mode.
2. When using preset EQ modes, you
cannot have access to Bass and Treble
settings.
System menu
Press the
SEL
button and hold for more
than 2 seconds to access system setup
menu mode, then
press the
momentarily to select the menu items in
sequence as follows:
"INVOL 17"(Initial Volume)
g
(adjust the clock)
g
mode)
"TAVOL 17" (traffic announcement
g
volume)
"EON ON" (EON on/off)
NONE" (equalizer mode)
(
) button and remove
RESET
OPEN
(
) on the
for about 2
the sound
hen the unit has not been
SEL
button
g
"ADJ 00:00"
"BEEP ALL"(beep tone
g
g
"LOUD OFF"
(loudness on/off)
stations on/off)
g
"STEREO" (STEREO/ MONO)
ON"(Alarm on/off)
After selecting the desired menu item,
rotate the volume control
of the selected item.
INITIAL VOLUME:
"
INVOL 17
rotate the volume control
display,
the initial volume of this unit.
CLOCK ADJUST:
"
ADJ 00.00
display,
rotate the volume control clockwise
to adjust hour,
counter-clockwise
BEEP TONE MODE:
The car audio device is equipped with 3
beep tone modes.
- Beep ALL mode:
when any key is pressed.
- Beep 2nd mode:
heard when you hold down a button with a
dual function, which activates the second
function of this button.
- Beep off mode:
disabled.
Traffic announcement volume:
This function allows you to define the
minimum volume for the traffic
announcements. The adjustable range is
0~45. The defaulted value is 17.
volume control
traffic announcements.
EON ON/OFF:
Rotate the volume control
ON or EON OFF.
DSP EFFECT:
The car audio device is equipped with 4
preset equalization modes.
volume control
modes with following sequence:
DSP NONE (OFF)
g
ROCK
LOUD ON/OFF:
Rotate the volume control to choose
loudness on or off.
"DSP
15
XCD 5710 MP3
g
"LOC OFF" (local
g
"REG OFF (REG on/off)
g
EXIT
to select the mode
" will be visible on the LCD
" will be visible on the LCD
rotate the volume control
to adjust minute.
The beep sound is on
The beep sound will be
The beep sound is
to adjust the volume of the
to choose EON
Rotate the
to select one of the EQ
g
CLAS(classical)
g
POP
FLAT
.
"
g
"ALRM
to adjust
Rotate the
g
Publicidad
Tabla de contenido
