Sunstech ACTIONCAM10 Manual Del Usuario página 13

2.2. To remove the TF card, press the end of memory card gently, the card will be ejected.
Note: The camera is not equipped with built-in memory. Please insert memory card before using.
Before using the camera, it is a must to format the memory card on the camera.
3. Startup and shutdown
3.1 Startup: press the POWER key for 3 second, the camera will show startup screen and enters into
POWER ON state;
3.2 Shutdown: press the POWER key for 3 second when the camera is under idle mode to shut down;
3.3 Auto shutdown: the camera will be shut down automatically when the camera is under idle mode for
a certain time to save power. The default time for auto shutdown is 3 min.
12