Installation Instructions - König Electronic SEC-MON51 Manual De Instalación Y Usuario

• Do not expose the monitor to water.
• Do not expose the monitor to high temperatures or humidity.
• Do not install the monitor close to strong magnetic fields, such as a TV or speaker. This may affect
the monitor's quality.

Installation instructions

1. Monitor
2. AV output jack connector
3. AV input jack connector
1. Place the monitor on its support (5) on a stable surface.
The monitor can also be mounted on an adjustable support (order separately with art. nr.
SEC-BRACK40) which can be mounted at the bottom of the monitor and fitted with 3 screws on a
horizontal or vertical surface.
2. Insert the DC plug into the DC 12V input jack connector (4).
3. Insert the AC/DC adapter into the wall socket.
4. Connect the camera with the AV input cable to one of the AV input jack connectors (3) on the rear
of the monitor (max. 4 cameras).
For information about installing and using the camera, refer to the camera's
installation manual.
5. You can connect an extra monitor to the AV output connector (2).
4. DC 12V input jack connector
5. Support
6. Fitting point for adjustable support
4