Preparations For Use; Placing The Heated Underblanket - Silvercrest SWUB 85 D3 Guía Rápida

Cubrecolchón eléctrico
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 43

Preparations for use

Placing the heated underblanket

Starting at the foot end, spread out the heated
underblanket (top, see Fig. B) over the mattress.
The plug-in connector
ket should be towards the head end (see Fig. C).
First connect the control unit
underblanket by plugging the two parts of the
plug-in connector
RISK OF DAMAGE TO THE
PRODUCT AND / OR OTHER
PROPERTY! Please be sure
– the plug-in connector
not get pinched on the bedframe.
– the cable does not get wedged between the
bedframe and the mattress.
– the cable does not get severely kinked.
Otherwise the plug-in connector
cable could be damaged.
Then place the bottom sheet as usual over
the heated underblanket, so that the heated
underblanket lies between the mattress and
the bottom sheet.
Ensure that the heated underblanket is completely
flat and that it does not become drawn together
or folded during use.
Before use on an adjustable bed, verify the
heated underblanket and the cables will not be
pinched in the hinges, for example, or pushed
together.
Switch the heated underblanket on approxi-
mately 30 minutes before going to bed and
cover it with the top sheet and other bedding.
By doing this you will keep all the heat in.
Switching on / off / Selecting
the temperature
Switching on:
Using the temperature setting switch
control unit
, set the temperature to setting
1
1, 2, 3, 4, 5 or 6 to switch on the heated under-
blanket. The function indicator
14 GB/IE
on the heated underblan-
5
to the heated
1
together (see Fig. D).
5
and the cable do
5
and the
5
on the
3
illuminates.
2
Switching off:
Using the temperature setting switch
control unit
, set the temperature to setting 0
1
to switch off the heated underblanket. The
function indicator
2
Selecting the temperature:
This heated underblanket has a rapid heat-up
feature. Set the control unit to the highest tem-
perature setting (setting 6). This will cause the
heated underblanket to warm up quickly.
the heated underblanket for several
hours, we recommend setting the
control unit
to the lowest temper-
1
ature to prevent the body from over-
heating, potentially resulting in burns
to the skin or heat stroke.
Storage
RISK OF DAMAGE TO THE
PRODUCT! Before putting it away,
let the heated underblanket cool
down. Otherwise material damage could occur.
RISK OF DAMAGE TO THE
PRODUCT! Do not crease the
heated underblanket by placing items
on top of it during storage. Otherwise material
damage could occur.
on the
3
ceases to illuminate.
When operating

Publicidad

Tabla de contenido
loading

Tabla de contenido