Conexión A La Red; Network Security Protocols - Samsung 8 Serie Manual De Instalación

Puede configurar el televisor de forma que se pueda acceder a las aplicaciones de SMART TV a través de la red de área local
(LAN) mediante una conexión con o sin cable.
✎
Luego de conectar "físicamente" su televisor a la red, debe configurar la conexión de red para terminar el proceso.
Puede configurar la conexión después del proceso de configuración inicial a través del menú del televisor.
Conexión de red inalámbrica
Puede conectar el televisor a la red de área local (LAN) mediante un módem o enrutador inalámbrico estándar.
Puerto LAN en la pared
Network Connection - Wireless
y This Smart TV supports the IEEE 802.11a/b/g /n communication protocols. Samsung recommends using IEEE 802.11n.
Otherwise, when you play video over a network connection, the video may not play smoothly.
y To use a wireless network, the TV must be connected to a wireless router or modem. If the wireless router supports DHCP,
the TV can use a DHCP or static IP address to connect to the wireless network.
y Select a channel that is not currently in use for the wireless router. If the channel set for the wireless router is currently
being used by another device, the result is usually interference and/or a communications failure.
y Most wireless networks have an optional security system. To enable a wireless network's security system, you need to
create a security key using characters and numbers, and then enter that key into the router through its menu. You then
must enter this security key into any other devices you want to connect to the wireless network.

Network Security Protocols

The TV only supports the following wireless network security protocols:
y Authentication Modes: WEP, WPAPSK, WPA2PSK
y Encryption Types: WEP, TKIP, AES
In compliance with the newest Wi-Fi certification specifications, Samsung TVs do not support WEP or TKIP security encryption
in networks running in the 802.11n mode.
If the wireless router supports WPS (Wi-Fi Protected Setup), you can connect the TV to your network using PBC (Push Button
Configuration) or a PIN (Personal Identification Number). WPS automatically configures the SSID and WPA key settings.
Your Smart TV cannot connect to uncertified wireless routers.
16
Español
[HC890_ZX]Install_Guide_00MSpa.indd 16
Conexión a la red
Enrutador IP inalámbrico
o módem (enrutador con
servidor DHCP)
Cable LAN (no suministrado)
2014-04-03 2:49:48