Operation; Product Description; Maintenance - Kärcher CR 7.220 Automatic Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20
physical, sensoric or mental capacities
or lack of experience and/or skills, un-
less such persons are accompanied
and supervised by a person in charge of
their safety or if they received precise
instructions on the use of this product.
Children should be supervised to pre-
vent them from playing with the product.

Operation

Product description

1 Hose coupling
2 Stopper / retract
3 Hose
4 Stopper
5 Metal bow
6 Handle
7 Wall mount
8 Fastening material
9 Tap connection with reduction fitting
10 Padlock (not included in the delivery)
11 Accessory compartment
12 Connection hose
13 Carrying handle
14 Spray nozzle
Preparing the Appliance
Illustration
 Mark the bores to mount the wall mount
and place dowels into the drilled bores.
 Fasten the wall mount using the includ-
ed washers and screws.
Illustration
 Place the hose box flush with the metal
bow and hook it in. Make sure that all 4
screw heads protrude from the hook
holes.
Slide the metal bow downwards verti-
cally all the way.
Illustration
 Attach the accessories holder to the
bottom side of the metal bow.
Illustration
 To change the swivel range, pull the left
or the right stop toward the outside and
swivel the hose box into the desired po-
sition.
(The swivel range of the hose box can
be swivelled in 30°-steps.)
Let the stop lock in in the desired posi-
tion.
Illustration
 Loosen both screws on the stopper.
 Slide the stopper to the desired position
and screw it in.
Illustration
 The product can be protected against
theft. Use the padlock for this.
NOTICE
Make sure the hose has free return play. It
should not be too dirty when it is coiled to
ensure the proper function of the automatic
retraction/recoiling.
 Connect the connecting hose to the wa-
ter tap.
 Open tap.
Unroll the hose
 Pull the hose out to the desired length.
The stop function of the hose box can
be activated in < 50 cm-steps and can
be noticed by a clicking sound.
 Attach the Kärcher garden accessories
to the hose coupling.
Coil the hose
 Trigger the automatic recoiling function
by briefly pulling on the hose.
 The garden hose is coiled up evenly.
Finish operation
 Turn off tap.

Maintenance

CAUTION
The hose box may not be opened.
Repair work on the product may only be
performed by the authorized customer ser-
vice.
– 2
EN
Operation
9

Publicidad

Tabla de contenido
loading

Tabla de contenido