Corsair HS70 Guía Rápida Del Usuario página 17

IMPORTANT SAFETY INFORMATION
CORSAIR HS WIRELESS Gaming Headset Safety Leaflet
Product name and model : Wireless Headset / RDA0016
Product name and model : USB Dongle / RDA0017
1. Read these instructions.
2. Keep these instructions.
3. For how to operate and use the product please refer to our Quick
Start Guide.
4. Heed all warnings.
5. Follow all instructions.
6. Do not use this apparatus near water.
7. Clean only with dry cloth.
8. Do not block any ventilation openings. Install in accordance with
the manufacturer's instructions.
9. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
10. Only use attachments/accessories specified by the manufacturer.
11. Unplug this apparatus during lightning storms or when unused for
long periods of time.
12. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
13. The apparatus shall not be exposed to dripping or splashing and
that no objects filled with liquids, such as vases, shall be placed on
the apparatus.
14. Warning: to reduce the risk of fire or electric shock, do not expose
this apparatus to rain or moisture.
15. Caution: these servicing instructions are for use by qualified
personnel only. To reduce the risk of electric shock do not
perform any servicing other than that contained in the operating
instructions unless you are qualified to do so.
16. Where the mains plug or an appliance coupler is used as the
disconnect device, the disconnect device shall remain
readily operable.
BATTERY SAFETY
For products which use a Lithium-Ion Polymer Battery (LIPB):
Precautions must be followed in the event that the headset is
disassembled for disposal, recycling, refurbishment, or repair.
1. Do not drop, hit, or bend the battery.
2. Electrical short circuiting of battery terminals is strictly prohibited,
as it may damage the battery cell.
Prohibition of disassembly
3. Never disassemble the battery cell.
4. Disassembling of the battery cell might cause an internal short
circuit in the battery cell, which may cause gassing, explosion, or
other dangerous conditions.
5. Battery electrolyte is harmful.
6. LIPB should not have liquid from electrolyte flowing, but in case
the electrolyte comes into contact with the skin or eyes, seek
medical help. Physicians shall flush the electrolyte immediately
with fresh water and medical advice is to be sought.
Prohibition of dumping of cells into fire
7. Never incinerate nor dispose the cells in fire. These may
causeexplosion of the cells, which is very dangerous and is
prohibited.
Prohibition of cells immersion into liquid such as water
8. The cells shall never be soaked with liquids such as water,
seawater, drinks such as soft drinks, juices, coffee or others.
Prohibition to use damaged cells
9. Cells might be damaged during shipping by shock. If any
abnormal features are found, such as damages in a plastic envelop
of the cell, deformation of the cell package, smelling of an
electrolyte, an electrolyte leakage and others, the cells must not
be used.
10. Cells with an electrolyte smell or a leakage shall be placed away
from fire to avoid firing or explosion.
CAUTION: Risk of explosion if battery is replaced by
an incorrect type.
CORSAIR HS WIRELESS GAMING HEADSET:
For Recycling and Disposal, first remove the battery according to
the following diagram:
1 2 3
4 5 6
Always dispose of used battery according to local regulations.
NOTE ON ENVIRONMENTAL PROTECTION
After the implementation of the European Directive
2012/19/EU in the national legal system, the following applies:
—Electrical and electronic devices may not be disposed of
with domestic waste.
—Consumers are obligated by law to return electrical and electronic
devices at the end of their service lives to the public collecting
points set up for this purpose of point of sale. Details to this are
defined by the national law of the respective country. This symbol
on the product, the instruction manual or the package indicates that
a product is subject to these regulations.By recycling, reusing the
materials or other forms of utilizing old devices, you are making an
important contribution to protecting our environment.
FCC — UNITED STATES AND CANADA
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
This device must not be co-located or operating in conjunction
with any other antenna or transmitter. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC ID 2AAFMRDA0017 (Dongle)
FCC ID 2AAFMRDA0016 (Headset)
CAUTION!
The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modifications to this equipment. Such
modifications could void the user authority to operate
the equipment.
FREQUENCY BAND 2403.35MHz---2477.35MHz
TRANSMIT POWER EIRP <10dBm
CANADA (IC) STATEMENTS
This device complies with Industry Canada license-exempt
RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference
that may cause undesired operation of the device.
IC 10954A-RDA0017 (Dongle)
IC 10954A-RDA0016 (Headset)
This equipment complies with IC RSS-102 radiation exposure limit set
forth for an uncontrolled environment.
THE AUTHORIZED REPRESENTATIVE IN EUROPE:
CORSAIR Memory, BV
Wormerweg 8, 1311 XB, Almere, Netherlands
COMPLIANCE
CORSAIR MEMORY, Inc. declares that this radio
equipment model "RDA0016" and "RDA0017" are in
compliance with Directive 2014/53/EU and Directive
2011/65/EU. The full text of the EU declaration of
conformity can be obtained at
regulatory@corsair.com.
PREVENTION OF HEARING LOSS
To prevent possible hearing damage,
do not listen at high volume levels for long periods.
IMPORTANT
Read and understand all instructions before you use your CORSAIR
audio product. If damage is caused by failure to follow instructions,
the warranty does not apply.
SAFETY
Risk of electric shock or fire!
• Never expose the product and/or accessories to rain or water.
Never place liquid containers, such as vases, near the product.
If liquids are spilt on or into the product, disconnect it from the
power socket immediately. Contact CORSAIR Customer Service to
have the product checked before use.
• Never place the product near naked flames or other heat sources,
including direct sunlight.
• Never insert objects into openings on the product.
• Where the mains plug or an appliance coupler is used as the
disconnect device, the disconnect device shall remain
readily operable.
• Disconnect the product from the power socket before/during
lighting storms.
• When you disconnect the power cord, always grip the plug, never
the cord.
Risk of short circuit or fire!
• Before you connect the product to a power socket, ensure that the
power voltage matches the value printed on the back or bottom
of the product.Never connect the product to a power socket if the
voltage is different.
• Never place the product or any objects on power cords or on other
electrical equipment.
• If the product is transported in temperatures below 5 degrees
Celsius,unpack the product and wait until its temperature matches
room temperature before connecting in to
a power socket.
Risk of overheating!
• Never install this product in a confined space. Always leave
a space of at least four inches around the product for ventilation.
Ensure curtains or other objects never cover the product.