Koenic KHB 610 Manual De Instrucciones página 17

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 19
English
Attention
Always ensure the appliance is disconnected
from the power supply before it is fully and
correctly assembled!
Danger of hand injury! Handle the blade
with care as it is very sharp!
Never use your hands to reach into the food
container. Always use wooden or plastic
spatulas, and only when the hand blender is
not running.
Do not use this appliance for processing
ice, hot liquids, heavy batter/dough, or hard
foods.
Pre-cut the food into small and even pieces
Note
When pureeing food, make sure to use
enough liquid (juice, milk, etc.) to obtain a
smooth mixture. Adjust the consistency of
the mixture by adding more liquid or soft
solids
Speed settings
The processing speed corresponds to
1
the setting of the speed control. Rotate
stepless speed control to adjust the speed.
The higher the setting, the faster the
blending results.
Maximum speed can be achieved by
pressing the speed button II (Turbo).
16
IM_KHB610_140609_V04.indb 16
Blending
Suitable for: Blending juices and shakes,
mixing soft ingredients, pureeing cooked
ingredients.
Mount the motor unit on the hand blender.
2
To do so, align the motor unit's
3
the blender's
icon.
Rotate the blender in a clockwise direction
4
until it clicks in place (now
are aligned).
5
Connect the plug to a suitable outlet.
6
Fill foodstuff into the measuring cup.
Observe the maximum marking on the
measuring cup.
Dip the blender bar as deeply as possible
into the ingredients. Work through the
ingredients by moving the appliance gently
up and down.
Hold the blender vertically. Tilting it might
lead to splashing foodstuff.
7
Set the desired speed selection. Press and
hold speed button I. Turbo can be achieved
by pressing and holding speed button II.
After use: Release the speed button and
8
disconnect the plug.
9
The anti-skid mat can be taken out as a lid
to cover the measuring cup and store inside
the fridge.
icon with
and
icons
6/9/14 3:21 PM

Publicidad

Tabla de contenido
loading

Tabla de contenido