00014462BDA
16.08.2005
Operation
1. Press power switch to the "OFF"position.
2. Complete either powering procedures.
(Please refer to the powering options)
3. Connect desired portable device:
a) Connect stereo with the stereo cable supplied to
MP3 jack on the "Top Side"of the HUB unit and the
other end of the stereo cable to MP3 jack.
b) Connect the plug on the stereo with the cable
supplied to your notebook's phone jack and plug the
other end of the cable to Line-in jack on the front
side of the HUB unit.
4. Stand up the R/L Speaker units and adjust angle for
desired listening.
5. Press power switch to the "ON"position (LED indicate
light should be illuminated)
6. Adjust volume as desired.
7. Turn on MP3 player or Notebook and enjoy the music.
(*Note: while the signals from your PC and MP3 deliver
15:07 Uhr
Seite 11
simultaneously, the MP3 signal will broadcast prior
to PC if both are connected.)
8. In order to charge MP3 player using the speaker
system; simply connect the USB cable that should be
supplied with your MP3 player to the USB jack on the
back side of the HUB unit.
Note to charging:
(1). In order to charge the unit must be powered on.
(2). To improve charge or prolong using your MP3;
(3). Charging of your MP3 is not available when
8
moderate volume will improve charging
speed while louder volume will slow down the
charging process.
the unit is powered with batteries.