Kerbl EasyHeat 23A Instrucciones De Uso página 13

• Never operate the device without supervision.
• Always keep the device in a safe, dry place out of the reach of children.
• Never remove the device type plate and replace it where necessary.
• National and international safety, health and occupational safety regulations must
be observed and complied with.
• The handle section and supply cable should not come into contact with the liquid being heated.
• When the device is switched on, the liquid to be heated may not be touched.
• Disconnect the device from the power supply before removing from the liquid being heated.
• This device can be used by children eight years (8) and older and by individuals with
impaired physical, sensory or mental abilities or those with insufficient experience
and/or knowledge to do so if they are being supervised or have been trained on the safe use of the
device and understand the underlying hazards. Children may not play with the device. Cleaning and
user maintenance may not be performed by children without supervision.
• Do not operate the device near explosive substance or atmospheres at risk of explosion
• Regularly check the device for leaks (seals, cable conduits and screw attachments). Neglecting this
check can result in significant danger.
• The device must not be operated via an external timer or a separate remote action system.
4. Setup of the device
The device comprises the following
components:
1 Control unit
2 Connection cable
3 Immersion pipe
4 Heater with integrated temperature probe
5 Cable holder
6 Control dial
7 Control light
1
5
2
3
4
13
5
7
6