Important Safeguards; Speed Setting; Useful Tips - Alpina SF-1012 Manual De Instrucciones

Dear Customer,
Thank you for choosing this ALPINA home appliance. Your Alpina appliance comes with a 2 year warranty and will
provide years of service if looked after properly. The ALPINA name brings you Quality, Reliability and Dependability. We
hope you will continue to make ALPINA your first choice in home appliances.
When using electrical appliances, basic safety precautions should be followed:
1. Read all instructions carefully.
2. Make sure the power supply corresponds to one on the rating label.
3. To avoid electrical shock, do not immerse electrical parts in water or other liquid.
4. Do not allow children to operate or play with the appliance.
5. Unplug from outlet when not in use, or before putting on/taking off parts.
6. Do not use with damaged electrical cord or plug.
7. If damaged or malfunction occurs, refer to an authorized service center only.
8. Do not place on or near hot surfaces.
9. Never pull the appliance by the power cord.
10. Do not use the appliance other than intended household use.
INSTRUCTION FOR USE
Assembling & Inserting the Glass Jar:
1. Put the rubber sealing ring (4) on the inner edge of the blade unit (5).
2. Put the blade unit with sealing ring into the cup base (6).
3. Insert the assembled Cup Base onto the bottom of the glass jar and secure tightly.
4. Mount the glass jar (3) onto the cup base unit and turn clockwise until glass jar locks into place.
5. Mount the Measure Cup (1) onto the Lid (2).
6. Secure the Lid onto Glass Jar and press down.
7. Make sure that the blender is switched off.
8. Place the jar (9) on to the motor base (7) and press down until securely engaged.
How to Use
A. Blender
1. Place the foodstuff you wish to process into the glass jar, put the lid and close securely.
2. Place the measuring cap into the hole of the lid and turn clockwise to lock and start blending.

SPEED SETTING

1. Low : for light usage of liquids
2. High : for more solid consistency – for mixing liquids and solid foodstuffs
3. M (Pulse setting): for ice crushing & short, powerful impulse movements (The switch does not permanently engage in
the 'M' setting. You have to hold the switch or turn it repeatedly.)
B. Grinder
1. Place the dry foodstuff (e.g. coffee bean, almonds etc.) into the grinder base.
2. Put the cover, close it securely and start milling.

USEFUL TIPS:

1. All parts of the blender must be thoroughly cleaned before using.
2. To achieve the best results, place small portions (2-3cm) into the glass jar one by one instead of placing a large
quantity at once.
3. When mixing solid ingredients start with a small amount of liquid. Gradually add more through the opening in the lid,
hold the top when operating this device.
4. For stirring solid or thick liquid ingredients we recommend that you use the blender in pulse mode to prevent the
blades from becoming stuck.

IMPORTANT SAFEGUARDS

4
ENGLISH