THOMSON SereaREPLY Manual De Instrucciones página 32

key, the display shows OGM1, scroll ▲ or ▼key to select the OGM1
5. Press
or OGM2.
6. Press key to confirm.
Outgoing messages (OGMs)
The outgoing message is the message a caller first hears when the answering
machine picks up their call. This product has two pre-recorded outgoing
messages, OGM 1 and OGM 2, and you can also record your own.
Select and Listen to OGM 1 and OGM 2
key, scroll ▲ or ▼key to select TAM.
1. Press
key, scroll ▲ or ▼key to select TAM SETTINGS.
2. Press
key, scroll ▲ or ▼key to select SET OGM.
3. Press
key, scroll ▲ or ▼key to select OGM1 or OGM 2.
4. Press
5. Press key, the display shows PLAY. Press
content.
Set TAM alarm
key, scroll ▲ or ▼key to select TAM.
1. Press
key, scroll ▲ or ▼key to select TAM SETTINGS.
2. Press
key, scroll ▲ or ▼key to select TAM ALERT.
3. Press
key, scroll ▲ or ▼key to select ON or OFF.
4. Press
Note: When setting to ON, you will hear warning tone every 20 seconds in idle
mode, if you have new messages.
Set Answer delay
It sets the number of times your product will ring before the answering machine
picks up your call and starts playing the outgoing message.
You can change this setting to between 2-9 rings or Toll Saver. The default setting
is 5 rings.
key, scroll ▲ or ▼key to select TAM.
1. Press
key, scroll ▲ or ▼key to select TAM SETTINGS.
2. Press
key, scroll ▲ or ▼key to select SET RING.
3. Press
key, scroll ▲ or ▼key to select the number of rings required and
4. Press
press key to confirm.
Toll saver
When you call from another phone to access your messages remotely, if your
answering machine is set to toll saver, and you have new messages it will
answer after 2 rings, if you do not have any new messages, it will ring after 5
key to listen to the OGM
31