Layout And Items Supplied; Proper Use; Technical Data - EINHELL TH-MG 135 E Manual De Instrucciones

2. Layout and items supplied

2.1 Layout
1 On/Off switch
2 Speed controller
3 Clamp nut
4 Locking knob for collet chuck
5 Cover
2.2 Items supplied (Fig. 1/2/3)
Please check that the article is complete as spe-
cifi ed in the scope of delivery. If parts are missing,
please contact our service center or the nearest
branch of the DIY store where you made your
purchase at the latest within 5 work days after
purchasing the article and upon presentation of
a valid bill of purchase. Also, refer to the warranty
table in the warranty provisions at the end of the
operating instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Important!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Case
•
Grinding disks
•
Grinding belts
•
Clamping spindles
•
Cutters
•
Felt polishers / arbors
•
Drill bits
•
Drive unit
•
Grinding pins
•
Grinding disks
•
Clamping sleeves
•
Cutting wheels
•
Flexible shaft
•
Table clamp
•
Telescopic stand rod
•
Grinding heads
•
Wire brushes
•
Original operating instructions
Anl_TH_MG_135_E_SPK8.indb 27 Anl_TH_MG_135_E_SPK8.indb 27
GB

3. Proper use

The Grinding and Engraving Set is designed to
perform drilling, grinding, deburring, polishing,
engraving, cutting, milling and cleaning jobs
on wood, metal and plastic in model-making,
workshop and household applications. Use the
tool and accessories only for those applications
described.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

See warranty card of your country.
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 60745.
Warning!
The specifi ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the specifi ed value
in exceptional circumstances.
The specifi ed vibration value can be used to
compare the equipment with other electric power
tools.
The specifi ed vibration value can be used for initi-
al assessment of a harmful eff ect.
- 27 -
29.10.12 13:27 29.10.12 13:27